Cutting the holes

 

  1. Use a jigsaw to cut out the holes. Be sure to use masking to protect the metal from scratches made by the tool.
  2. OR. Use a drill press with the appropriate hole saw to cut holes.
    1. Ive been using a 2 holes saw for the 2 1/16 gauges. You can dremel the inside of the hole down until your gauge fits.
  3. Drill out LED holes
  4. Go around panel with a dremel tool to clean out all of the holes and smooth the edges.

 

 

 

 

 

 

 

 



 Home